WE12 · 1.2 t
Mini excavators 1.2 t
1.2 t. Fits through a 1.0 m gate. Bought for landscaping, trenching and interior demolition where a larger machine simply cannot enter.
Compare WE08 vs WE12
WE08 · Mini excavators
WE08 — 0.8 t Mini excavators
0.8 t. The machine that goes through a 720 mm door: interior demolition, basement digs, garden work. Sales code WE08 — the number is the tonne class, as on every model in this range.
0.8 t
Capacity
Briggs & Stratton XR13.5
Engine
1,650 mm
Max digging depth
2,400 mm
Max digging height
WE08
No photograph of this build on file yet. Ask and we send current photographs of the exact unit, with its serial number, before you order.
We would rather show nothing than a picture of a different machine.
Specification
| Model | WE08 |
|---|---|
| Bucket capacity | 0.030 m³ |
| Max digging depth | 1,650 mm |
| Max digging height | 2,400 mm |
| Max dump height | 2,400 mm |
| Max digging radius | 1,605 mm |
| Dozer blade W / H | 907 / 200 mm |
| Engine | Briggs & Stratton XR13.5 |
| Rated power | 7.6/3000 kW/rpm |
| Displacement | 0.499L |
|---|---|
| Engine type | single-cylinder, four-stroke, air-cooled, horizontal shaft |
| Track width | Rubber 150 × 72 × 34 |
| Dimensions (L × W × H) | 2220 × 720 × 2200 mm |
| Fuel tank | 5.5 L |
| Hydraulic tank | 8 L |
| Gradeability | 30° |
| Travel speed | 0-2 km/h |
| Rated hydraulic pressure | 18.5 MPa |
Every figure on this page is copied from the factory build sheet for this model. Nothing is estimated.
Standard build
| Emission standard | China II |
|---|---|
| Undercarriage width | 720 mm |
| Canopy | four-post, open |
| Boom cylinders | below boom |
| Controls | mechanical |
| Valve type | positive valve |
Anything not on this table is quoted in writing rather than assumed. Ask for the datasheet of the exact build you are buying.
What WE08 is bought for
0.8 t. The machine that goes through a 720 mm door: interior demolition, basement digs, garden work. Sales code WE08 — the number is the tonne class, as on every model in this range.
If the load is consistently heavier than 0.8 t, the next frame up carries the same mast and fork family, so the attachment and spare-parts stock do not have to change. If the load is lighter but the access is the constraint, the frame below is the one that fits through the door — capacity is rarely the only variable.
The size above and below
Wear parts for WE08
The parts that fail first on this class, with the interval we see in the field.
Customer feedback
We publish feedback only with the buyer's permission and only when it is attributable — no anonymous quotes. If you would like to speak to someone running this class of machine, ask for a reference and we will arrange the call with their consent.
Quote for WE08
Send the load, the lift height and the destination port. You get the model, the mast, the attachment and a written price.